female header, a type of connector.

1. Application: This type of connector is widely used in PCB circuit boards in electronics, electrical appliances, and instruments.

2. Function: Its function is to serve as a bridge between blocked or isolated circuits in a circuit, undertaking the task of current or signal transmission. It is usually used together with a female header to form a btb connection; or used together with the end of an electronic cable assembly to form a board-to-wire connection; it can also be used independently for board-to-board connection.

3. Classification: According to pitch, it can be roughly divided into seven types: 0.8mm, 1.0mm, 1.27mm, 2.00mm, 2.54mm, 3.96mm, and 5.08mm (other special pitches can also be customized as needed); according to the number of rows, there are single row female header, dual row female header, three row female header, four row female header, etc.; according to the packaging usage, there are smt, DIP (straight/right-angle) etc.; according to the installation method: 180 degree, 90 degree, smt; according to whether height increase is needed and whether positioning posts are needed, there are 2 types of positioning posts, one is inner positioning posts, and the other is ear positioning posts; female header terminal types: U terminal and Y terminal (U-shaped terminal, with contact on 3 surfaces, generally used when the plastic height is low; Y-shaped terminal, with contact on 2 surfaces, generally used when the plastic height is high).

Note: Please insert and remove the pin header and female header slowly. Especially when removing the pin header, try to ensure that both ends of the pin header can come out at the same time, so as to avoid damaging the pins.

1.Material Housing: PA9T+30%G.F UL94V-0, Color: Black.

 Terminal: Brass, Nickel plated 30u", Gold plated (customizable)

2.Characteristics:

 Rated Current:2 AMP. 

 Contact Resistance:20 mΩ MAX. 

 Insulation Resistance:1000 MΩ MIN.

 Withstanding Voltage:AC 500V/Minute. 

 Temperature Range: -40°C to+105°C